Type: Plasma Cutters
Manuf: KOMATSU
Model: KCR-0951
Reference No.: 80500048

5' x 10' Komatsu Rasor CNC Fine Plasma Cutting System
Age: 1994, refurbished in 2008
Model: KCR-0951

Maximum Cutting Width ............... 5'
Maximum Cutting Length .............. 10'
Mild Steel Capacity ................. 0.062"-0.5"
Aluminum Capacity ................... 0.062"-0.5"
Stainless Steel Capacity ............ 0.028"-0.5"
Minimum Kerf Width .................. 0.06"
Cutting Speed Range ................. 30-300 IPM
Rapid Traverse Speed ................ 1000 IPM
Variable Cutting Current ............ 3-90 Amps.
Plasma Power Unit ................... Komatsu G990-I
Plasma Power Poser Requirements ..... 230 volt/3 phase 50/60Hz - 27.0 KVA
Control Unit ........................ LCD Display, Alpha-Numeric, Keypad, Joystick
Machine (CNC) Power Requirements .... 120 volt/single phase, 50/60 Hz - 2.4 KVA
Torch Height Control ................ Komatsu control with setup probe
Machine Weight ...................... 4800 Lbs.
Floor Space Requirements ............ 16' x 30'

Features:
    Factory rebuilt and recertified in 2008.
    Welded box beam construction 
    Heavy duty center drive with dual side rack and pinion 
    Drawers for scrap and small part retrieval
    Simple alpha numeric joystick control with parameter input 
    Parameter storage for cutting conditions 
    Positional accuracy +/- 0.004 in., repeatability 0.002 in.
    Magnetic field to control plasma arc column 
    Torch height control with setup probe 
    Pierce height accuracy +/- .015 inches 
    Automatic voltage control maintains cutting height at over 100in/min
    Hemispherical collision detection system 
    Tested and verified machine accuracy 
    Quicksilver process: clean cut stainless steel and aluminum
    Ability to process polyethylene coated materials 
    Simple consumables setup: 1 electrode, 3 nozzle sizes
    Bevel angle +/- 2 degrees 

    Software:
	Rasor Server for Windows - DNC Software
	PathMaster - part drawing software, DXF import
	Rasor Nest - nesting software

Available for inspection under power in plant


Request Quote or More Info:

Komatsu America Industries LLC
Cutting Technologies Div.
226 Lowell Street, Unit A5
Wilmington MA 01887
USA
Contact: Stephen St.Hilaire
Phone: 978-658-1650
Fax:   978-658-1654
e-Mail: machinesales@komatsuplasma.com

www.komatsuplasma.com